LinkBack Thread Tools
post #1 of 3 Old 05-19-2017, 11:12 AM Thread Starter
Junior Member
 
Join Date: Apr 2017
Posts: 11
12 volt access at the rear fuse panel

I need a constant 12v for the trailer wiring. There is a male spade connector back there that will work. I need 15 amp capacity.
Anyone know how heavy the wiring is back there?

TIA, Marty
otbiker is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 05-19-2017, 08:36 PM
Super Moderator
 
atlcarl69's Avatar
 
Join Date: Oct 2014
Posts: 2,508
Garage
Yes there is, use the spade at fuse location F26 (this is the location for the factory tow wiring).
Basically, the input side of the panel is rated in the 100s of amps as you would have one feed for each of the circuit types (switched or unswitched). Note there is only one spade there in your case as you don't (methinks) have factory trailer wiring, and you can use a common Yellow spade #10 12-10 AWG.

ATL GA USA
2013 Titanium<SEL Tuxedo Black 2.0 Built 07.19.2012
OEM Xenons, 302A package, PanoRoof, Sony MFT Nav
Parking Tech Package, PVD Chrome Rims, Ford Tow Pkg
Help us help you - what is your year, engine, drivetrain, trim and SYNC version?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
atlcarl69 is offline  
post #3 of 3 Old 05-19-2017, 09:24 PM Thread Starter
Junior Member
 
Join Date: Apr 2017
Posts: 11
Thanks. Just wanted to make sure...

15 SE 2.0l AWD

Marty in Kerrville
otbiker is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



  Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Panel Positraktion Exterior and Interior 4 01-12-2017 09:44 PM
Passenger fuse box panel/cover ? llamatrails Exterior and Interior 11 05-20-2016 12:01 PM
Garmin Nuvi 3597 LMTHD Hard-Wire to Fuse Panel Infared Electronics, Audio, and Lighting 3 03-07-2015 08:34 PM
re and re rear bumper and rear quarter panel petro DIY Garage 0 12-13-2014 12:42 PM
Trailer Hitch wiring harness - 12 volt supply connection to rear fuse box? k-vegas Electronics, Audio, and Lighting 1 06-24-2014 10:42 PM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On