2013+ Ford Escape Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
if it's working, now is the perfect time to test the wiring, as you're looking for it to stop. If it isn't working, wiggling the wires is unlikely to make it work, as it won't enable the camera without a reliable connection. no problem, there were very few actual answers when mine went out as to what actually fixed the problem. this particular harness has been revised a few times, so it must be a known issue. when I wiggled mine, it also made the license plate lights flicker, which made the decision to just replace it an easy one. this is the harness that goes from the lock harness under the main/big panel inside the car inside the small removable panel outside that holds the camera and license plate lights
 
1 - 3 of 3 Posts
Top