HPFM. Welcome to the forum. Let's hope it set a code that dealer can pull.
Welcome. I have not had that happen to me but have at times had some unique stuff happen. Sometimes, it may be a transient one time deal that will clear itself after a start stop cycle. Sometimes not. Had a 150 truck that would occasionally go into "slo mode". I quickly learned that if I stopped the vehicle and restarted that things would clear themselves. As the other commenter said, you can go to the dealer have have them check for a code.I have a 2016 Ford Escape SE with 17,000 miles on it. Today while driving the dash lit up with "Engine Fault-Sevice Now" along with the air bag light and other things lighting up on the dash. I was able to pull over before the car completely stalled and would not move. Right before I turned it off it displayed "Hill Start Assist not available." I turned it off and then back on all all the lights were gone and I was able to make it to my destination. Anyone have a similar situation?
I have a 2016 Ford Escape SE with 17,000 miles on it. Today while driving the dash lit up with "Engine Fault-Sevice Now" along with the air bag light and other things lighting up on the dash. I was able to pull over before the car completely stalled and would not move. Right before I turned it off it displayed "Hill Start Assist not available." I turned it off and then back on all all the lights were gone and I was able to make it to my destination. Anyone have a similar situation?