2013+ Ford Escape Forum banner

61 - 80 of 97 Posts

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
I double checked and that ASBUILT is correct. If you can't change it maybe there is a forscan bug? I just got my hands on a 2020 Hybrid Titanium today and intend to tryout this mod as well.
79223


ALSO: for Hybrid:

7D0-01-02 XX4X-XXXX-XX



This one I'm not sure about, but can you report what it does?

7D0-07-01 X5XX-XXXX-XX
 

·
Registered
Joined
·
86 Posts
I double checked and that ASBUILT is correct. If you can't change it maybe there is a forscan bug? I just got my hands on a 2020 Hybrid Titanium today and intend to tryout this mod as well.
View attachment 79223
Hmmm I'm comparing against a 2021 with the elite package, and i see the following:

79224


Top is my 2020, bottom is 2021 Titanium Hybrid Elite from ETIS. Both are the original AsBuilt's with no changes. Odd it's showing 40 for both!

We'll get this narrowed down eventually :)
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
HMM, Here are some asbuilts:


I also discovered that for the hybrid, changes might not be needed to:

720-09-01
720-09-02


Even if it doesn't work, you should still have the option under cruise control options in the APIM/ 8" screen?
 

·
Registered
Joined
·
86 Posts
Here's the differences I got from 2 CAN TitaniumHybrids against the values we're thinking need to be changed.

All where the same for changes except:

706-04-01 FFFC-27XX-XX
7D0-01-02 XX4X-XXX-XXX
7D0-09-02 XXXE-XFX4-XD

I'll try these values when I'm done work and see if anything changes. Who knows, maybe plunking in Canadian numbers will work :)
I'm going to compare against the two you linked above too. We have to pay attention to FWD vs AWD as well.
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
Another Thought, part of the problem might be that I'm using USA asbuilts which obviously read MPH signs and you're using KPH... It may be best to just look at the locations I've listed and copy the values from a local vehicle.
 

·
Registered
Joined
·
86 Posts
I agree, I will try that tonight. I'm hoping that the actual module revision (P/N) and strategy firmware isn't a limiting factor as well. I'll report back with what I find.
 

·
Registered
Joined
·
86 Posts
OK! So copying the changes from a Canadian 2021 did the trick. All options are available and the system works fine.

Now if I can figure out why my rain sense wipers do nothing, that would be great lol Normal intermittent works fine, but if i set rain sense on, they do nothing in the intermittent position, unless you move the adjustment on the stalk, then they will wipe once.

I've got warranty so i'm not too concerned, but hate waiting lol.
 

·
Registered
Joined
·
2 Posts
OK! So copying the changes from a Canadian 2021 did the trick. All options are available and the system works fine.

Now if I can figure out why my rain sense wipers do nothing, that would be great lol Normal intermittent works fine, but if i set rain sense on, they do nothing in the intermittent position, unless you move the adjustment on the stalk, then they will wipe once.

I've got warranty so i'm not too concerned, but hate waiting lol.
Hi there
I have exactly the same car as yours, if you don’t mind. Could you please provide me the asbuilt sheet so I can have this nice feature too? Thank you so much!
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
OK! So copying the changes from a Canadian 2021 did the trick. All options are available and the system works fine.

Now if I can figure out why my rain sense wipers do nothing, that would be great lol Normal intermittent works fine, but if i set rain sense on, they do nothing in the intermittent position, unless you move the adjustment on the stalk, then they will wipe once.

I've got warranty so i'm not too concerned, but hate waiting lol.
if you pull down the cover for the camera and look I bet the rain sensor is unclipped, here is a picture, it should be clipped into that round hole. I discovered this on my titanium gas, the sensor was there, it just wasn’t clipped into the windshield.
79225
 

·
Registered
Joined
·
1,572 Posts
OK! So copying the changes from a Canadian 2021 did the trick. All options are available and the system works fine.

Now if I can figure out why my rain sense wipers do nothing, that would be great lol Normal intermittent works fine, but if i set rain sense on, they do nothing in the intermittent position, unless you move the adjustment on the stalk, then they will wipe once.

I've got warranty so i'm not too concerned, but hate waiting lol.
Not quite sure what you mean re the rain sensing feature operation. Do you turn the dial adjustment up to the maximum sensitivity or thereabouts as in my experience that is where it needs to be to detect rain?
 

·
Registered
Joined
·
86 Posts
Hi there
I have exactly the same car as yours, if you don’t mind. Could you please provide me the asbuilt sheet so I can have this nice feature too? Thank you so much!
Edit: Formatting

Just so this thread is updated, Here's the values I used to get this to work in my Canadian 2020 Titanium Hybrid - AWD w/Elite:

IPMA
706-01-01 XXXX-XXDB-XX
706-01-02 XXXA-XXXX-XX
706-02-03 F8XX-X8XX-XX
706-02-04 XXX8-XXXX-XX
706-02-05 X8XX-XXXX-X8
706-02-06 XXXX-XXX8-XX
706-04-01 FFFC-27XX- XX

APIM
7D0-01-02 XX4X-XXXX-XX
7D0-02-02 XBXX-XXXX-XX (A for vehicles without Flank guard sensors)
7D0-09-02 XXXE-XFX4-XD

Both the 2020 and 2021 had the IPC settings already set the same.
 

·
Registered
Joined
·
86 Posts
Not quite sure what you mean re the rain sensing feature. Do you turn the dial adjustment up to the maximum 'sensing' or thereabouts?
Rain sensing wipers I'm meaning, you can turn it off to have just normal intermittent wipers, or turn it on to have the rain sensing. Which does 0 right now unless you change the "dial adjustment" then it will give you one swipe, and not do anything after that.
 

·
Registered
Joined
·
1,572 Posts
Rain sensing wipers I'm meaning, you can turn it off to have just normal intermittent wipers, or turn it on to have the rain sensing. Which does 0 right now unless you change the "dial adjustment" then it will give you one swipe, and not do anything after that.
So when you turn up the dial adjustment to maximum sensitivity and leave it there it just does one swipe and then nothing even though it is raining?

The other possibility is that the rain sensing feature is turned off in your dash menu settings.
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
Rain sensing wipers I'm meaning, you can turn it off to have just normal intermittent wipers, or turn it on to have the rain sensing. Which does 0 right now unless you change the "dial adjustment" then it will give you one swipe, and not do anything after that.
Exactly the same thing with my car, until I discovered the sensor not attached to the windshield.
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
Here is my revised USA TSR / IACC data:

IPMA:
706-01-01 XXXX-XXDB-XX
706-01-02 XXXA-XXXX-XX
706-02-03 F8XX-X8XX-XX
706-02-04 XXX8-XXXX-XX
706-02-05 X8XX-XXXX-X8
706-02-06 XXXX-XXX8-XX
706-04-01 FFFC-27XX-8X (XXXX-XXXX-8X may not be needed)

IPC:
720-09-01 XXXX-XXXX-8X
720-09-02 2XXX-XX (This was changed from 3XXX-XX, either value seems to work )

APIM:
7D0-01-02 XX6X-XXXX-XX (4 For Hybrid)
7D0-02-02 XBXX-XXXX-XX (A for vehicles without Flank guard sensors)
7D0-09-02 XXXE-XFXX-XD

This has now been validated on a 2020 Titanium GAS and also 2020 Titanium Hybrid.
 

·
Registered
Joined
·
86 Posts
Exactly the same thing with my car, until I discovered the sensor not attached to the windshield.
OOOoooer I'll have to check this :) Thanks for the heads up.
 

·
Registered
Joined
·
5 Posts
Here is my revised USA TSR / IACC data:

IPMA:
706-01-01 XXXX-XXDB-XX
706-01-02 XXXA-XXXX-XX
706-02-03 F8XX-X8XX-XX
706-02-04 XXX8-XXXX-XX
706-02-05 X8XX-XXXX-X8
706-02-06 XXXX-XXX8-XX
706-04-01 FFFC-27XX-8X (XXXX-XXXX-8X may not be needed)

IPC:
720-09-01 XXXX-XXXX-8X
720-09-02 2XXX-XX (This was changed from 3XXX-XX, either value seems to work )

APIM:
7D0-01-02 XX6X-XXXX-XX (4 For Hybrid)
7D0-02-02 XBXX-XXXX-XX (A for vehicles without Flank guard sensors)
7D0-09-02 XXXE-XFXX-XD

This has now been validated on a 2020 Titanium GAS and also 2020 Titanium Hybrid.
That's great news. I have a 2020 Titanium Hybrid, I don't have the forscan system. I would be interested in a road trip to compensate someone to do these changes to my vehicle. Would you be interested in something like that?

Tom
 

·
Registered
2020 Escape SE I3 & 2020 Titanium Hybrid
Joined
·
132 Posts
Maybe if you told me where you lived?
 
61 - 80 of 97 Posts
Top