2013+ Ford Escape Forum banner

1 - 2 of 2 Posts

32 Posts
Discussion Starter · #1 ·
Okay, so the vacuum pump went out, and I replaced it. Only problem is that the plastic hose was brittle and cracked where it attaches. To be clear, the attachment of the hose to the pump is fine. The portion of the hose that goes to the right is fine. The attachment (highlighted by the yellow arrow) of the small hose from the left to the connector, is where cracks developed.

How serious is this? What part is this and how do I find it?


2013, AWD, 2.0, SE
1 - 2 of 2 Posts