You do not need Forscan or anything else to reset your BMS, there is a simple procedure.
1. Turn key on but don't start
2. Flash high beam headlights 5 times. (Usually pull back on signal light lever)
3. Hit brakes 3 times
4. Watch for battery light to start flashing
That's all there is to it
I found out this works on every Ford from 2011 up if it has the BMS on the vehicle.
1. Turn key on but don't start
2. Flash high beam headlights 5 times. (Usually pull back on signal light lever)
3. Hit brakes 3 times
4. Watch for battery light to start flashing
That's all there is to it
I found out this works on every Ford from 2011 up if it has the BMS on the vehicle.