That's cool. I would like that but not sure I will ever get to it.

 

Cool! Thanks for all the work! Gonna try this out in the next couple days. So I can skip the "May not be needed" codes to begin with to see if iacc works?

 

Exactly!

 

So I added IACC and it worked with the limited set of codes
I did see some DTC after I made the updates is that normal?
Also, what does the HUD codes add? I already see the speed limit show up in the HUD

 

You need to clear Dtcs after programming.
The codes for the HUD add add the speed limit indicator. If you already have it then there is no need.

 

Got it! Again appreciate all the effort that has gone into this.
Was able to try it out today and all I had to do was turn on cruise control and the speed was already set as desired, cool!

 

Is there anywhere in the system to tell it how far over the speed limit to set cruise to? Or does it just always set the cruise to the legal speed limit?

 

No, there is a setting in the sync 3 when you select intelligent cruise. You can do +/-20 mph

 

Just did this. One note to add, for the APIM settings on an SE Sport Hybrid, you need the 6 not the 4. The 4 doesn't bring up the intelligent option.

 

Replying to myself on this to record something. First time I did this in the hybrid, I needed the 6. This time I needed the 4. Not sure why, but there it is.

 

Pardon my possible ignorance, as I'm new to using forscan. I have a 2020 Hybrid Titanium AWD (built sometime in June 2020), which has adaptive cruise control. I was hoping to add the intelligent cruise/speed sign recognition feature, but my IPMA seems to have things in an XXXX-XXXX-XXXX format. Is there something I'm doing wrong, or possibly some kind of translation for what my IPMA settings should be? I didn't want to make any guesses about where things should end up since I have extra characters in my config without asking here, as I don't want to totally mess up my vehicle. I took screenshots of the IPMA screen in forscan in case it would be helpful.

Thanks in advance to anyone who might be able to provide some guidance on this.

-Chris

 

Yes, the first post in this thread under "For USA"

 

The 4 instead of a 6 enables disables the start-stop toggle.

 

Hello, I have a few questions I hope can be answered

1. If I didn't want to modify the as built and wanted to use the plain text options for this mod, what would I need to change? I've read that it's safer to use the plain text options rather than the as built code itself, so that's why I'm curious.

2. Messed with the HUD speed sign showing but it's not a USA style sign, I don't think that one has a plain text option, so unsure on how to get it to be USA based

 

I did this with mine as I didn't want to mess with the ASBUILT and mess something up. I just went through each of the modules (IPMA, IPC & APIM) and just enabled everything that was related to the intelligent cruise control. I already had the ACC, just not IACC, so I only had to go through and enable a couple of things on each module.

Sent from my SM-S908U using Tapatalk

 

So I’m having an issue, everything shows up correctly on my IPC and infotainment, however no speed limit sign will show up on my IPC or in my infotainment. Thoughts? In IPMA I changed 701-01-01 and 701-01-02, do I need more coding?

 

I have a 2022 titanium PHEV and already have those options in my APIM so I’m assuming I already have these features from the factory… that said I feel like the sign recognization camera isn’t working fully with my dash.

While on back roads in my area that do not have GPS speed signs, I will frequently pass clearly visible speed limit signs on the road and while the HUD will display the speed, my digital dash will not. In more well known areas the dash will show the US style sign but I feel like it’s feeding off GPS data at that point?

Also, if I go past the speed limit the HUD will turn my speed red but nothing happens on the dash. The US style sign stays solid.

Any thoughts on how to fix this?

 

Bonus info:

Using camera only mode:

I have recently discovered information on how to use camera only speed limit information, this is useful if you live in an area with faulty GPS speed limit information.

706-01-01 XXXX-XXXB-XX = GPS and Camera Fusion speed limit recognition
OR
706-01-01 XXXX-XXX3-XX = Camera only speed limit recognition

Hello, I live in Argentina and own a 2022 Escape Hybrid Titanium made in USA. Titanium trim already comes with ACC & TSR activated.
Thanks for this post I enabled IACC on my car and seems to works fine.

There is only a litlle (big) problem... here trucks, buses and other utility vehicles have a sign on their back showing their maximum allowed speed (see pic). So when I pass such a vehicle the TSR reads that sign and changes the speed limit of the IACC... I may be driving on a residential street with maximum 40 km/h and the TSR might read a 110 km/h sign from a parked pick-up... so imagine what can happen ;-)

Is there any way to have IACC only use the speeds from the Navigation instead of the ones read by the camera?

 

Thanks for this! Worked great on my 2020 Titanium.

Guessing the USA Speed signs aren't in the HUD?

 

Hey , successfully enabled TSR and IACC on 2020 Escape Titanium , but i have a problem with that Navigation itself does not show now any info about speed limit , or - HUD shows 50kph and the IPC shows 30kph from sign recognition instead showing the same speed , it's like Navigation speed limit is shown on HUD instead fusion with camera . Any solution with that ? I saw also that car slows down or speeds up to desired speed when sign is recognised but sometimes it don't work while the speed on HUD and IPC are different

 

Factory NAV only shows the speed in the map database, not what the TSR sees.
Hence the reason that when you have TSR from the factory the factory NAV speed display is disabled.

 

Hi everyone, how can i enable only tolerance? Thank you.