A ajef7885 · Registered Joined Jun 22, 2013 · 213 Posts #2 · Sep 23, 2022 View full thread Do you need to remove the Intake Air Temp sensor at air box or MAP? This engine doesn't have a MAF.
A ajef7885 · Registered Joined Jun 22, 2013 · 213 Posts #3 · Sep 23, 2022 View full thread The MAP is on passenger side front of the engine under the cover. If you have a code for MAP make sure your negative battery cable isn't at fault. There are instances of the BMS connector being corroded and throwing MAP code.
The MAP is on passenger side front of the engine under the cover. If you have a code for MAP make sure your negative battery cable isn't at fault. There are instances of the BMS connector being corroded and throwing MAP code.
A ajef7885 · Registered Joined Jun 22, 2013 · 213 Posts #5 · Sep 24, 2022 View full thread same part # on an Ecosport so procedure is the same. Ford EcoSport Intake Air Temperature (IAT) Sensor Replacement Guide - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 & 2021 - Picture Illustrated Automotive Maintenance DIY Instructions (paulstravelpictures.com)
same part # on an Ecosport so procedure is the same. Ford EcoSport Intake Air Temperature (IAT) Sensor Replacement Guide - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 & 2021 - Picture Illustrated Automotive Maintenance DIY Instructions (paulstravelpictures.com)
A ajef7885 · Registered Joined Jun 22, 2013 · 213 Posts #8 · Sep 27, 2022 View full thread From my literature it's a straight replacement. No calibration or other ECU adjustments. Just clear any trouble codes after new installation.
From my literature it's a straight replacement. No calibration or other ECU adjustments. Just clear any trouble codes after new installation.