This thread is about converting Sync3 MY20 Nav US -> PL (or just ny other EU language).
It was started before SyncRenovation was available, so before these MY20 APIMs could be safely reformatted. So, the procedure/method below refers to the older, "manual" method of removing US packages and adding EU ones.
The method has six steps. Since SyncRenovation exists now, we may just replace steps 2 through 5 with using SyncRenovation, leaving just three steps (jailbreak, reformat and configure). If you would like to do so, skip to this post.
Old method below.
For conversion of Sync3 MY20 Nav US -> PL (likely any other EU language, I think), here is a shortened "todo" list:
1. Jailbreak (FMods) plus FMods Installer Daemon and FMods Tools
2. Removal of Gracenotes (Syn3 Updater)
3. Removing US/NA maps and navigation voices (Navigation Data Remover)
4. Finding current ENH_DAB 1U5T-14G658-xxx and VOICE 5U5T-14G391-xxx packages for Europe and installing it on Sync3
5. Downloading a subset of EU maps, navigation voices and the map license, installing it using Maps Updater
6. Reconfiguring ACM, IPC and APIM with Forscan, and then enabling your language in the Sync menu
No warranties for anything, it worked for me in Escape 2020 Titanium with Sync 3.4 (EU maps with speed limits, Polish turn-by-turn navigation voice, Polish speech recognition, FM tuning every 50 MHz, RDS, station logos).
I have a more detailed information in Polish, describing space issues, listing sizes, with links to tools etc. I posted it on Polish forum.fordclubpolska.org, but the post mysteriously disappeared within 30 minutes, and as for now moderators don't seem to be willing to answer why. Pecunia non olet, I guess (there's a lot of offers if you want to pay to have this job done for you).
Can do that in English as well, if anyone is interested.
It was started before SyncRenovation was available, so before these MY20 APIMs could be safely reformatted. So, the procedure/method below refers to the older, "manual" method of removing US packages and adding EU ones.
The method has six steps. Since SyncRenovation exists now, we may just replace steps 2 through 5 with using SyncRenovation, leaving just three steps (jailbreak, reformat and configure). If you would like to do so, skip to this post.
Old method below.
For conversion of Sync3 MY20 Nav US -> PL (likely any other EU language, I think), here is a shortened "todo" list:
1. Jailbreak (FMods) plus FMods Installer Daemon and FMods Tools
2. Removal of Gracenotes (Syn3 Updater)
3. Removing US/NA maps and navigation voices (Navigation Data Remover)
4. Finding current ENH_DAB 1U5T-14G658-xxx and VOICE 5U5T-14G391-xxx packages for Europe and installing it on Sync3
5. Downloading a subset of EU maps, navigation voices and the map license, installing it using Maps Updater
6. Reconfiguring ACM, IPC and APIM with Forscan, and then enabling your language in the Sync menu
No warranties for anything, it worked for me in Escape 2020 Titanium with Sync 3.4 (EU maps with speed limits, Polish turn-by-turn navigation voice, Polish speech recognition, FM tuning every 50 MHz, RDS, station logos).
I have a more detailed information in Polish, describing space issues, listing sizes, with links to tools etc. I posted it on Polish forum.fordclubpolska.org, but the post mysteriously disappeared within 30 minutes, and as for now moderators don't seem to be willing to answer why. Pecunia non olet, I guess (there's a lot of offers if you want to pay to have this job done for you).
Can do that in English as well, if anyone is interested.
