I ran into a bounce back problem and had to rock the glass back and forth in the track to fix it.
After that I had to re-calibrate the window, the procedure is slightly different from previous years.
1. Start the engine (just accessory won't work).
2. Move the window to the closed position.
3. Press and hold the window control switch until the door window is fully open.
4. Release the window control switch.
5. Lift and hold the window control switch until the door window is fully closed.
6. Release the window control switch.
7. Lift and hold the window control switch again for at least one second.
8. Press and hold the window control switch until the door window is fully open.
9. Release the window control switch.
10. Lift and hold the window control switch until the window is fully closed.
11. Test for correct window operation by carrying out the one-touch down and one-touch up features.
After that I had to re-calibrate the window, the procedure is slightly different from previous years.
1. Start the engine (just accessory won't work).
2. Move the window to the closed position.
3. Press and hold the window control switch until the door window is fully open.
4. Release the window control switch.
5. Lift and hold the window control switch until the door window is fully closed.
6. Release the window control switch.
7. Lift and hold the window control switch again for at least one second.
8. Press and hold the window control switch until the door window is fully open.
9. Release the window control switch.
10. Lift and hold the window control switch until the window is fully closed.
11. Test for correct window operation by carrying out the one-touch down and one-touch up features.
