On my 2013 the splash shield is missing almost all the bolts that hold the back side of the cover. I only have one screw and wanted to verify if it’s what everybody else has or it’s a completely wrong screw?
RoadKill
Splash shield bolts??
1 reading
On my 2013 the splash shield is missing almost all the bolts that hold the back side of the cover. I only have one screw and wanted to verify if it’s what everybody else has or it’s a completely wrong screw?
Attachments
I had these on my 2013 C-Max. This screw threads into a plastic clip in the undercarriage. In most cases, the plastic is stripped so the screws fall out. Looks like you may need the full set of clips, plus screws -1. Then only tighten them by hand.
Stay well,
Frank
Stay well,
Frank
Should be T30 Torx.
howtune.com
Change the Oil on a Ford Escape
How to do an oil change on a 2013, 2014, 2015 Ford Escape 2.5, and 2.0 or 1.6 Ecooboost engines. I'll cover Oil type, tools, and interval to make you a pro at changing your oil. Oil change interval may be up to one year or 10000 miles. The computer has a service recommendation based on the last...
howtune.com
You can find them cheaper than the dealer from ebay or Amazon. You will probably also need new plastic nuts. Amazon.com: Flow.month Fender Liner Engine Cover Splash Shield T30 Torx Screws Clip Set Fit for Ford Focus Escape Explorer, Replacement for The Part# W702413-S307 W715835-S300 W702438-S300, 10 Sets: Automotive
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
